(1) Due to the bending of the conveyor frame, the bending part should be checked, and the straightness and levelness should be adjusted.
(2) The rollers before the deviation are not perpendicular to the direction of the conveyor belt and should be adjusted.
(3) There are block like attachments on the roller. Scrapers and other cleaning devices need to be promptly removed and installed.
(4) Poor transport of rollers requires proper maintenance and enhanced lubrication.
(5) If the center of the roller is offset or stuck with material, it is necessary to adjust the center of the roller, install a scraper, and remove block attachments.
(6) The position of the feeding device is not suitable and needs to be corrected.
